Back to Top

1
Hi, Guest!
  • Counter Omron H7BX-A

Counter Omron H7BX-A

Update Terakhir
:
02 / 04 / 2024
Min. Pembelian
:
1 Unit

Harga

CALL

Detail Counter Omron H7BX-A

Ratings Function 1 Stage Preset Counter, Total Preset Counter Preset stages 1 stage Rated supply voltage 100 to 240 VAC 50/ 60 Hz Operating voltage range 85% to 110% of rated supply voltage External power supply 12 VDC( + -10% ) 100 mA Counter ( Count range) -99999 to 999999 Counter ( Max. counting speed) 30 Hz/ 5 kHz( switching) Minimum counting input signal width: 16.7 ms( ON/ OFF ratio: 1: 1) / 0.1 ms( ON/ OFF ratio: 1: 1) Common setting for CP1 and CP2 Counter ( Input mode) Increment decrement or increment/ decrement ( UP/ DOWN A ( command input) , UP/ DOWN B ( individual input) and UP/ DOWN C( quadrature input) ) Counter ( Output modes) N, F, C, R, K-1, P, Q, A, K-2, D, L Counter ( One-shot time) 0.01 to 99.99 s variable Counter ( Reset system) External, manual and automatic reset ( internal according to C, R, P and Q mode operation) Input signal CP1 , CP2 , Reset1 , Reset2 , Key protect Input method No-voltage/ Voltage input( selectable) No-voltage input ( No-contact input) Short-circuit ( ON) impedance: 1 kOhm max. Leakage current( 0 ohm) : Approx. 12 mA Residual voltage: 3 V max. Open circuit impedance: 100 kOhm min. Maximum voltage: 30 VDC max. No-voltage input ( Contact input) Use a contact which can adequately switch 5 mA at 10 V. Voltage input Hight level: 4.5 to 30 VDC Low level: 0 to 2 VDC Input resistance: Approx. 4.7 kOhm Applicable two-wire sensor leakage current: 1.5 mA max. Switching capacity: 5 mA min. Residual voltage: 3.0 VDC max. Operating voltage: 10 VDC Minimum input signal width External reset: 1 ms/ 20 ms( selectable) Standby time 290 ms Max. Control output ( Contact output) Output type: SPST-NO Switching capacity: 3 A at 250 VAC/ 30 VDC, resistive load ( cos phi= 1) Minimum applicable load: 10 mA at 5 VDC ( failure level: P reference value) Control output ( Solid-state output) Output type: Transistor output Switchig capacity: 30 VDC max. 100mA max. Residual voltage: 1.5 V max. ( Actual performance 1.0 V) Leakage current: 0.1 mA max. Display method 7-segment backlit negative transmissive LCD Digit 6 digit Character height Count value: 13.5 mm ( Red or green programmable) Set value: 9 mm ( Green) Prescaling function Provided ( 0.001 to 99.999) Decimal point adjustment Rightmost 3 digits Key protection Key protect input Teaching function Not provided Batch counting function Not provided Communications Not provided Memory backup EEPROM ( Number of rewite: 100000 times min., Service life: Approx. 10 years min.) Surrounding air temperature Operating: -10 to + 55 CEL ( With no icing or condensation) Storage: -25 to + 65 CEL ( With no icing or condensation) Ambient humidity Operating: 25% to 85% Storage: 25% to 85%
Tampilkan Lebih Banyak
Kontak Kami